A Tour of the Etching Process
I begin from a sketch in my drawing tablet of the shoreline of Avalanche Lake. Giant boulders balance and look as if their ready to crash into the water, spruce trees jut up wherever they find a foothold amongst the rocks. The cliffs of Mt. Colden loom out of the lake on the opposite shore.
The edges of a zinc plate are filed so that when the plate is printed the pressure of the press won't rip into a sharp edge and rip the paper.
I have made a quick line drawing of the scene in reverse and now scratch the image into the zinc plate to use as guidelines
Sometimes just a quick glance tells me that "there is an etching", or even a sentence or phrase will give me an idea for an image.
The etching plate is coated with 'hard ground', asphaltum and wax. It is acid resistant but allows me to draw through it's surface to the metal below. The exposed metal is put into a nitric acid bath, which etches into the plate, wherever I've drawn. The darkest areas are drawn first and therefore exposed to the acid the longest and are the deepest cuts, holding the most ink. Then I pull my first proof.
I spread ink over the plate and progressively
wipe the plate clean,
beginning my wipe with a dirty cheesecloth and ending the final wipe
with a smooth piece of newsprint.
Youngs Studio & Gallery Home Page